Sale FormatPrivate Treaty SaleClosed Sale StatusClosedUnder Instructions from BAE SystemsMAJOR SHIPYARD & FABRICATION ASSETSDate & TimeNOW ACCEPTING OFFERS LocationWilliamstown, VIC - Australia More InfoPainting & Blasting Facilities, Cranes, Welders, Profile Cutters & Plate Roller

Date & Time

NOW ACCEPTING OFFERS

Inspection

Inspection Info

Removal

See Below

Location

Williamstown, VIC – Australia

Button 1

View & Bid

Sale Details

Defense Contractor and Shipbuilder BAE Systems is scaling back it’s operations at the Williamstown Shipyard, presenting a great opportunity to purchase large scale maintenance and material handling equipment.

SHOT BLAST & PAINTING FACILITY

• Freestanding Building (approximately 30m x 42m) with all Bolted Steel Construction, Steel Sheet Clad Main Roller Entry approximately 18m (W)
• Blast and Paint Chamber (approximately 23m x 25m), with 2 Rubber Belt Conveyors & Grit Collection to Chamber sides
• Heated Air Systems including Aira GHD4500 Gas Fired Heater
• Fan Unit (approximately 2m diameter), powered by WEG 415V 220kW Motor
• (2) Air Extraction Units with Manifold to side to Chamber
• (3) Dust Extraction Units
• (3) Chambers, (4) Pulse/Chamber with Twin Collectors to bottom Pipework & Exhausts
• (3) 2010 Compair L250-10A Air Compressors
• (3) Compair F780CS+ Refrigerant Air Dryers
• All Electrical, Plumbing and Control Systems
• Burwell Dust Extraction Unit w/ 6.6kVA Transformer
• Grit Recovery System includesRubber Belt Conveyors to Chamber sides approximately 28m (L), Bucket Elevator approximately 10m (H), 2x Vacuum Collection Chambers and Hose, Main Heavy Grit Recovery Site. Pressurized Grit Delivery Vessel, (2) Munkebo Medium Grit Recovery Cyclones & Mukeso Fine Grit Recovery Motorized Extraction Cyclone, Dust Extraction Unit, 2 Pulse, Single Bay Collector
• Breathing Air System including Compair D50 HSR Air Compressor, Compair F133CT Air Drier & Air Receiving Tank

IMG WELDING LINE

• (1) Fillet Welding Gantry, 13.2t, fitted w/ (4) Kemppi KempArc DT400 Welding Heads, Rexroth Pneumatic Positioning Rams, (2) Integrated Abus Pendant Control Electric Chain Hoists
• (4) Positioner / Track Gantries each 7.5t, fitted with 500kg SWL Positioner Clamp & Pendant Controls
• (4) Kemppi 415V Welding Power Supplies
• Gantry Span Approximately 10m
• Overall Bed size approximately6.4m x 65m (in 12 sections)
• Complete with Rail, Controls, Fume Extraction & Work Piece Stillages

HGG PROFILE CUTTING LINE

• Part Loading In-Feed Conveyor System
• Shot Blast Station
• Conveyor and Accumulation Section
• Profile Cutter
• Out-Feed Conveyor Section
• Complete w/ all Controls & Air Receiving Tank

FARLEY LASERLAB TRIDENT PROFILE CUTTER

• Single Plasma Cutting Head
• (2) oxy-Acetylene Cutting Heads
• (2) Anderson Engineers Water Cutting Beds each approximately – 14m x 7.5m
• Complete with Hypertherm HPR260 Plasma Power Supply, Matthews Jet A Mark 8400e Inkjet Controller & Control Cabinet

ABRASIVE BLASTING SERVICE & SUPPLIES BLASTING ROOM

• Chamber approximately 6.0m x 4.4m internal
• Full width twin doors
• Internal lighting
• Side access door
• Bolted panel construction
• Underfloor grit/dust collection with 3 conveyors
• (1) Grit collectiohn hopper with 2x blasting pots & twin dust collection bags powered by 415V 22kW motor
• (1) Dust collection hopper with twin bags powered by 415V 22kW motor

OLIVER NEGATIVE PRESSURE SPRAY BOOTH

• Booth approximately 10.8m x 6.5m x 2.6m (h) internal • Dust collection & exhaust system
• Internal lighting
• Dual entry with double sliding doors & side access door
• 6,700L/sec, 1,800L water tank capacity
• Natural gas heating
• Laser Electrical control board comprising spray booth and flash off booth controls

FUJICAN PLATE ROLLER

• Approximate 12.5m operating width
• Complete with roller infeed tables
• Integrated Hydraulic system
• Control console
• Hydraulic load bank
• (2) rear mounted 1T SWL swinging jib cranes
• In built dual hoist delivery system
• (4) twin powered drive rollers
• Pit mounted, steel fabricated footings
• Safety guard railing
• Installed by ITL installation Pty Ltd

CATERPILLAR 800F PACKAGED GENERATOR

• CAT 3412STA V12 27L twin turbo diesel engine (s/n: 1EZ14279)
• 880kW/1180HP at 1800RPM
• 1000kVA rated power
• 440/254V rated voltage
• 60Hz rated frequency
• 1320 amp rated current
• 1,250 amp Main Switch
• (1) 3 phase main switch (no socket outlets)
• Capable of 415V @ 50Hz (currently set up as 440V @ 60Hz & 1312Amps)
• Less than 100 hours (test & maintenance run only)
• Skid frame base with integrated fuel tank
• 11,320kg approximate mass

2012 LINK BELT RTC-8050 SERIES II ALL TERRAIN CRANE

• WLL 50,000 Kg
• (4) section main boom
• (2) section luffing boom
• (5) 25-20 ply rating tyres
• Johnson Blocks ORJ40014RTB 40 Tonne block
• LSI GS320 wind speed indicator

DEER PARK 70T TRACKED STRADDLE CRANE

• Class 4
• Main hoist SWL: 70T at 14.8m to 27m, 67T at 35m, 49T at 44m
• Auxiliary hoist 1 SWL: 70T at 9m to 13.8m, 64T at 23m
• Auxiliary hoist 2 SWL: 10T at 26 to 50.1m
• DC electric hoist motors with Siemens drives
• Electromechanical relay controls
• Track width approximately 8m wide
• Approximately 6m clear straddle width
• (2) Siemens 400V 37.3kW electric drive motors
• 6kVa transformer on board

2X DEER PARK 36T TRACKED STRADDLE CRANES

• Class 4
• Main Hoist SWL: 36T at 18.5m, 20T at 29m
• DC electric hoist motors with Siemens drive
• Electromechanical relay controls
• Track width approximately 8m wide
• Approximately 6m clear straddle width
• (2) Siemens 400V 23kw electric drive motors
• Contactor box mounted under pier

GIBB MILLER TRACKED STRADDLE CRANE

• Main hoist 6T max load
• Auxiliary hoist 3T max load
• Track width approximately 16m
• Approximately 35m of travel across main gantry
• Fitted with 2 tonne 32 head electromagnetic plate lift

2012 ALIMAK HEK SE1600FC MATERIALS HOIST

• 1600kg/21 passenger capacity
• 6 m/s operational speed

4X KONE CRANES 30T OVERHEAD TRAVELLING GANTRY CRANES

• Class C4 M5
• 30T max capacity
• Approximately 24m span
• (2) 10T hoists & 1x 3T auxiliary hoist on each
• Wireless remote controls

2X KONE CRANES 20T OVERHEAD TRAVELLING GANTRY CRANES

• Class C4 M4
• 20T max capacity
• Approximately 29.5m span
• (2) 20T hoists & 1x 5T auxiliary hoist on each
• Wireless remote controls

4X TMC DRY TYPE TRANSFORMERS

• 6kV/960V
• (2) 7.0kV/960V

2X THYCON FREQUENCY CONVERTORS

• 15,000kVA
• 60Hz

3X QUINCY AIR COMPRESSORS

• (2) QGD315 with refrigerant dryer and filter
• (1) QT51516 with refrigerant dryer and filter

Additional Info

Painting & Blasting Facilities, Cranes,
Welders, Profile Cutters & Plate Roller

Sale Partner

FOR MORE INFORMATION CONTACT

Lee Pulbrook: 0499 993 285 or [email protected]

Matt Travess: 0499 072 388 or [email protected]