For Immediate Sale - Portage, WI

By order of Pendaform for Immediate Sale

Four Station Rotary Thermoforming Machine

2008 Brown Machine Model R-244ETS-917
Replacement Cost of Over 3 Million Dollars


Make An Offer Now


7660 Industrial Rd.
Portage, WI 53901

**By Appointment Only**

Matthew DelGuidice at (708) 422-7400

Specifications for a cut-sheet, all-electric, multiple-station, rotary-motion vacuum thermoformer designed and manufactured by Brown Machine, LLC. A horizontal rotating wheel indexes the cut-to-size sheets through the load/unload station, heat and form stations.

Application Information

Maximum Mold Size to be Utilized: Within Specification Maximum Depth of Draw: Within Specification
Minimum Sheet Width: Within Specification
Maximum Sheet Width: Within Specification
Product: Vacuum / Pressure / Twin Sheet Product
Material Type: HDPE & others
Minimum Material Thickness: .040
Maximum Material Thickness: .500

Model Nomenclature

The first character of the model designation, the letter R, signifies a rotary thermoformed.
The second character, a number, signifies the number of form station platens.
The third character, a number, signifies the number of oven heater banks.
The fourth character, a number, signifies the number of stations the machine has, thus the number of indexes the wheel makes to complete a full rotation.
The fifth character, is the letter E, signifies the platens are electric motor actuated.
The sixth character, a letter, signifies that it has a pressurized form station.
The seventh and eight characters, letters, signifies that it has twin sheet capabilities.
The last characters, numbers, signify the max mold dimensions in feet.

Standard Machine Dimensions & Specifications

4.1 Dimensions (approximate)
Maximum mold size: 114" x 210"
Maximum sheet size: 116" x 212"
Oven size: 120" x 216"
Std. top platen stroke: 60"
Depth of draw above sheetline 15"
Std. bottom platen stroke: 60"
Depth of draw above sheetline 28"
Maximum sheet sag clearance 28"
Daylight:(top/bottom closed dimension) 10" / 10"
Sheetline to floor: 128"
Height to the top of the gear posts: 256"
Height to the top of the machine frame: 188"
Height to the top of the gearbox and motor: 256"
Footprint: 50’x 50’
Door opening: 15’ wide x 14’ high

4.2 Electrical
4.2.1 Main power : 480/3/60 VAC
4.2.2 Control power 24VDC
4.2.3 Approximate max. amp load: 3,000 amps with two separate drops
4.3 Air Requirements
4.3.1 2" air supply at 80 psi (5.5 bar) (minimum) is required.
4.3.2 Air supply must be clean and dry.
4.3.3 Specific requirements for each cycle will vary according to forming routine, depth of draw, mold cavity size, and part cycle time.
4.4 Colors
4.4.1 Machine Frame: Buckskin (Dark Olive Green)
4.4.2 Guard Frame: Beige
4.4.3 Guard Grid: Black
4.4.4 Electrical Enclosures: Beige
4.4.5 Face of Operator Console: Black Textured Vinyl

Click on an image to enlarge...


For details, Click Here to Contact Matthew DelGuidice


For details, Click Here to Contact Matthew DelGuidice

Sale Partner

In Cooperation with Century Services Corp.

Contact Information

Tiger Comercial & Industrial

340 N. Westlake Blvd.

Westlake Village CA 91362


800-758-TIGER (8443)


All Contents Copyright © 2009-2011 Tiger Valuation Services, LLC and Tiger Capital Group, LLC. All Rights Reserved.